The Closed Loop DC Current Sensor by Telcon is a hall effect sensor that takes a 200A signal and outputs a corresponding 100mA signal.
The closed loop DC current sensor by Telcon is used for applications requiring an accurate, fast response signal proportional to the primary current being measured (AC or DC). The HT200M is a closed loop DC current sensor that is suitable for Panel Mounting. It has a 2000:1 ratio. It outputs 100mA at the rated current. The output signal current type will reflect the current type of the primary (AC->AC or DC->DC). The diameter opening is 26 mm.
Rated for 200A continuous operation, the HT200M offers high accuracy, high bandwidth and high electrical isolation. It weighs 100 grams. It has 0.1% linearity and 0.65% accuracy overall.
The HT200M is UL listed, File No. E198118
Note that the Telcon HT200M ships with the mating connector (when ordered from Aim Dynamics)!
When searching for compatible power meters to this high accuracy DC current sensor, look for DC meters on our website that accept an Adc input. These meters will show the following symbol as the input:
You can view all of our current sensors here.