3 Phase Flexible CT – RCS-3600 by Magnelab


10 - 24$17 / item
25 -$34 / item
Auswahl zurücksetzen

All RCS units require Active Power

Artikelnummer: RCS-3600
Product Description

Magnelab’s RCS-3600 is a 3 Phase Flexible CT kit that transforms an AC input current up to 5000 Amps to a 0.333 Volt output.

The RCS-3600 is a 3 Phase Flexible CT kit that comes with 3 RopeCTs (Rogowski Coils) and one integrator (signal conditioner) that converts the RopeCT voltage to 0.333 volt AC output. The integrator requires a DC power supply that operates between 9 and 36 Vdc.

The RCS-3600, in addition to its large 12″ diameter, also allows for very wide ranges of input currents.  The product is designed to operate from 10% to 130% of the rated current with 1% accuracy.  For example, the RCS-3600-5000, which is the 5000A version, will be 1% accurate from 500A to 6500A.

The RCS-3600 has these advantages in comparison to a traditional CT:

  • Greater linearity
  • High amperage measurement capability
  • Extremely flexible
  • Lightweight
  • Large circumferences available
  • No shorting block required

Compatible power meters accept a voltage input.  Look for meters on our website that start with this symbol:


If you are purchasing a Measurlogic, Veris or eGauge meter you do not need to purchase the RCS integrator (at least if ordered properly).  Instead, you can use QTY 3 of the passive RCT-3600-000 (that comes without the integrator) and save money.  If you are not using one of these 3 manufacturers, you will most likely need an integrator to compensate for the phase shift and low voltage output of the RCT-3600-000.

Note: The integrator requires a power supply of 9 to 36 Vdc, which is not included. You may
purchase one here.

To see all Rogowski coil options visit our Rogowski Coil Product Page. You can view all of our current sensors here.

Zusätzliche Information

Gewicht2.2 lbs
Größe17 x 11 x 1.5 in
Amp Rating

1000, 1500, 2000, 250, 2500, 3000, 400, 4000, 500, 5000, 800