Hall Effect HOYL-S Series by LEM

Hall effect, 200 – 800A

Clear
Product Description

The HOYL-S by LEM is an open loop Hall effect device designed for the electronic measurement of DC, AC and pulsed currents with galvanic separation between the primary and secondary circuits.

The HOYL-S has primary ratings of 200 – 800A and can measure up to 2000A DC or AC.  A single +5Vdc power supply is required to provide power.  The HOYL-S Hall effect current transducer is 1% accurate.  It outputs 2.5V at 0A on the primary, outputs 3.3 V at the rated current (positive) and 1.7V at the rated current (negative).

The HOYL-S can measure DC current and pulsed currents, as well AC frequencies up to 140 kHz (-3 dB).  It has a fast response (~3 µS) and low offset drift.  These devices have been evaluated for over voltage category III and pollution degree 2 environments.

Note that HOYL-S from Aim Dynamics ships with the mating connector!  There is no need to try and specially order the connector, only to get the wrong one, delay your project, etc. If you would like this product with a lower amperage rating see the HOYS-S models.

Features

  • Open loop multi-range current transducer
  • 0.8 V output at primary nominal RMS current
  • 1% Accuracy
  • 0.5% Linearity
  • Measures DC to ~140 kHz (-3 dB)
  • Single power supply +5 V
  • Overcurrent detect 2.93 × IPN (peak value)
  • Galvanic separation between primary and secondary circuit
  • Low power consumption
  • For busbar mounting
  • Aperture: 40 × 13 mm
  • Factory calibrated
  • Connection mating with JST:
    • housing PAP-05V-S
    • contact SPHD-00xT-P0.5
  • Low offset drift
  • Over-drivable Vref
  • Creepage /clearance > 10.5 mm
  • Fast response
  • Low profile 2 mm pitch connector for 22 to 28 AWG wire
  • UL Recognized

Technical Specs

HOYL-S Series Technical Specs

Applications

  • AC variable speed and servo motor drives
  • Static converters for DC motor drives
  • Battery supplied applications
  • Uninterruptible Power Supplies (UPS)
  • Switched Mode Power Supplies (SMPS)
  • Power supplies for welding applications
  • Combiner box
  • Solar inverter on DC side of the inverter (MPPT)

Standards

  • IEC 61800-2: 2015
  • IEC 61800-3: 2004
  • IEC 61800-5-1: 2007
  • IEC 62109-1: 2010
  • UL 508: 2013

Certifications

CE

ISO 9001

rohs compliant

Additional information

Weight.1 lbs
Dimensions3 x 2 x 1 in
Amp Rating

200A, 400A, 600A, 800A