Renewable Power Meter Starter Kit by eGauge/Magnelab

Product Description

This renewable power meter starter kit is designed to give you the first components to start your power monitoring project.

This power monitoring starter kit includes one eGauge power meter (A000-ETH-016) and 3 MagneLab current transformers (SCT-0750).

The eGauge web power meter measures electric power and makes the data available online through its built-in web-server. This power meter is great for renewable energy monitoring.  It can measure electric AC power on up to 12 circuits.

The SCT-0750 is 1% accurate when operating from 10% to 130% of the rated input current.  For example, given a 120A circuit breaker, the SCT-0750-100 would work well, because it will maintain its accuracy up to 130A (130% of the rated input).

For a full description as well as technical specs and certifications on the eGauge A000-ETH, see it’s dedicated product page here.  For the MagneLab SCT-0750,  see it’s dedicated product page is here.


eGauge Features

  • Measures electric AC power on up to 12 circuits:
  • Calculate building-demand/consumption
  • Determine renewable energy production (e.g., PV solar, wind)
  • Measure individual appliances, such as geothermal pumps, air conditioning, refrigerators, etc.
  • Supports wide range of current transformers (CTs) to accommodate virtually any size load/production-facility
  • Built-in web server
  • Fully web-configurable
  • Built-in solid-state memory retains up to 30 years of data
  • Internet-enabled but can also operate autonomously without Internet connection
  • Free life-time firmware upgrades
  • No service contracts
  • No maintenance
  • No batteries to replace
  • Windows, Mac, Linux, & smart-phone compatible.
  • For residential, commercial, municipal, and industrial use.
  • BACnet compatible (PICS).
  • FCC and UL-61010 compliant

Sentran Features

  • Input Current: AC current, single phase 50/60Hz (must specify)
  • Crest Factor:  Set to 1.414 time full scale input current
  • Voltage Rating: 600VAC rated CAT IV
  • Bandwidth: 50Hz to 400Hz
  • Standard Output Voltages: 100, 250, 333, 500, 1000mVAC
  • Current Output Available.  See the 4LSF-100.
  • Output Limiting: 14V peak transient voltage suppressor for current ratio type
  • Standard Accuracy: Class 1.0 per Table 11*, IEC 60044-1
  • Optional Accuracy (OPT O.5): Class 0.5 per Table 11*, IEC 60044-1
    • *Note: Sentran Corp, accuracies are better than Table 11 with conductor or busbar located in the center and perpendicular to the window opening.
  • Output Resistance (voltage output type): <100 ohms typical
  • Interface Resistance or Impedance: Must be >100K ohms
  • Temperature Range, Environment: -40°C to 70°C
    • Note: This is very conservative UL rating, can be as high as 1.25X
  • Shorted Output Capability: Continuous as FLA
  • Dynamic Rating: 50 times FLA for 5 seconds once per 5 minutes. Note: This is a Sentran Corporation conducted test.
  • Max Altitude: 2000 meters
  • Pollution Degree: 2
  • Humidity: 95% non-condensing
  • Construction: UL approved per UL2808 CAT IV to 120°C
  • Lead Wires: Black/white twisted pair. 18AWG MTW, UL1015 double insulated
  • Installation Label: Label towards source for white lead positive

Egauge Certifications



Made in USA

FCC Logo

Sentran Certifications

UL Listed


Made in USA

ISO 9001

rohs compliant

Additional information

Weight1 lbs
Dimensions2 x 5 x 5 in
Amp Rating

000, 5, 10, 20, 30, 50, 70, 100, 150, 200