ACTL-1250-300 333mV Output Split-Core Current Transducer by Socomec

Description

The patented Accu-CT split-core current transformer technology delivers exceptional linearity and low-end accuracy

• Developed specifically for solar inverter, variable speed motor drive, and other applications where there are large variations in current
• The 100:1 turn down ratio of Accu-CTs is ten times better than industry standard CTs
• The unique one-handed opening and closing mechanism makes installation a snap
• 1.77 in x 1.26 in (45 mm x 32 mm) Window Opening
• Safe: built-in burden resistor provides 0.333 Vac voltage output at the rated full scale current—no shorting blocks needed
• UL 2808 Listed meets 2017 NEC code requirements for field installed current transformers
• IEEE C57.13 and IEC 60044-1 accuracy: over full temperature range and down to below 1% of rated current
• Exceptionally low phase angle error: essential for accurate power and energy measurements
• Glove-friendly: easy to open and install with one hand while wearing safety gloves
• 333mV Output
• REVENUE GRADE ACCURACY
  • With Option C0.6, the Accu-CT is calibrated and verified to meet IEEE/ANSI C57.13-2008 class 0.6 accuracy and IEC 60044-1 class 0.5 S accuracy and each CT is shipped with a certificate of calibration
  • When used on 50 Hz services, Option C0.6 must be ordered with Option 50Hz
  • Accuracy: ±0.50% from 1% to 120% of rated primary current
  • Phase angle: ±0.25 degrees (15 minutes) from 1% to 120% of rated current; ±0.50 degrees (30 minutes) below 0°C from 1% to 10% of rated current
  • IEEE C57.13 accuracy: class 0.6 from 1% to 120% of rated current
  • IEC 60044-1 accuracy: class 0.5 and 0.5 S from 1% to 120% of rated current
  • Note: The ACTL-0750-250 Opt C0.6 model specifications are valid only to 40°C

Cross References:
Optosolutions
OPTOEMU-ACT-0750-250
Schneider
METSECTLV2040U
METSECTLV3060U