MSCTE-40 Split Core 0 to 5 VDC output Analog Current Sensor by ACI

Description

The MSCT Analog Current Sensors are designed for use in any AC current monitoring application in which you are looking to monitor a piece of equipment for proper operation

• Accuracy
  • With the steady decrease in operating currents on today’s equipment, the MSCT Series current sensors have the industry’s highest accuracy
  • This enables you to better monitor the current used in your applications, as well as make better maintenance decisions to ensure your systems run as efficiently as possible
• Output
  • The MSCTA-40 is offered in a 2 wire 4-20 mA loop powered output
  • The MSCTE-40 is offered in a 0-5 VDC output
  • The MSCT current sensors are available in a split-core version and can monitor up to 40 A
• Design
  • The MSCT current sensors use an “Average” current measuring method and should be used in applications where a pure Sinusoidal AC waveform that has very little or no distortion/noise on the conductor being monitored
  • Applications may include monitoring a resistive type load such as an incandescent light bulb or heating element as well as any single speed linear load
  • For best results, the MSCT current sensors should not be used in applications with switching power supplies or variable speed drives due to the limited operating frequency range
• Installation
  • The MSCT current sensors can be secured to the monitored cable using a cable tie and the integrated cable tie anchor feature of the housing
  • The MSCT also comes with an attachable mounting foot that allows the unit to be mounted in any position using one Tek screw or snapped directly on a 35 mm DIN rail
• Applications
  • Load Trending
  • Single Speed Loads
  • Pumps
  • Compressors
  • Fans
  • Preventative Maintenance
  • LEED
  • Project Justification (Calculating ROI)
  • Process Control