Products specifications
Attribute name | Attribute value |
---|
Gas Type | Carbon Monoxide, Nitrogen Dioxide |
Measurement Range | 0~10 ppm, 0~250 ppm |
Communication | RS485, Serial, BACnet MS/TP |
Contact | 3 SPDT |
Supply Voltage | 24 Vac, 24 Vdc |
Series | B6/Q6 |
Description
The Q6/B6 Toxic/Combustible Gas Detectors use various sensing technologies to detect a wide assortment of gases
- These units are housed in a NEMA 4X rated plastic enclosure that will meet a wide variety of applications
- The combo unit consists of a main unit (Carbon Monoxide only) with an LCD, LED status indication, 3 user configurable relays and a remote sensing unit (various gas types available) for installation at high or low elevations based on the density of the gas being detected
- The main and remote unit gas concentrations levels are both displayed on the main unit’s LCD
- This series also features a sensor module that can be easily replaced by removing a couple of screws and unplugging the existing module before inserting the new factory calibrated sensing module
- All units should be verified for proper functionality and calibration once the replacement sensor module has been reinstalled
- A user selectable password can be used to protect the system integrity
- The Q6 can be used as a standalone gas detector or in conjunction with one of our Q4C, M-Controller or Q-Controllers using the proprietary RS-485 Optomux communication protocol
- ACI also offers a full line of horns and strobes that can be used with the gas detectors or building management system to alert building occupants of an alarm condition
- B6-CO/NO2-10P: BACnet MSTP, Smart Sensor, Combination, Main: CO 0-250 ppm, Remote: NO2 0-10 ppm, 3 SPDT Relays, NEMA 4X