Q5C-CO-250P-O-X Carbon Monoxide Analog / Modbus RTU Toxic Gas Transmitter by ACI

Description

The B5/Q5 Toxic/Combustible Gas Detectors use various sensing technologies to detect a wide assortment of gases

• These units are housed in a NEMA 4X rated plastic enclosure that will meet the most stringent applications
• All models feature an internal clock, LCD Display for displaying gas concentrations and setup, LED Status Indication, integral buzzer with three user configurable relays and a number of different communication protocols for use with one of our gas controllers or your
  building management system
• Factory calibrated sensor module replacements are available and are easily replaced in the field by removing two screws on the previous module
• All units should be checked for proper functionality and calibration once the replacement sensor module is reinstalled and has had a chance to warm up
• A user selectable password can be used to protect the system integrity
• The Q5 can be used as a standalone gas detector or in conjunction with the Q4C, M-Controller or Q-Controllers using the proprietary RS-485 Optomux communication protocol
• The B5 uses BACnet™ MSTP (RS485) protocol to communicate directly with a BAS. ACI also offers a full line of horns and strobes that can be used with the Gas detectors or building management system to alert building occupants of an alarm condition
• Refer to all applicable Federal, State, Provincial and Local Health and Safety laws and regulations before using these products
• The Q5/B5-GENL can be ordered to monitor specific combustible gases such as Gasoline, Ethanol, Diesel or Jet fuel
• Contact ACI for specific gases