RCT-2400 Series Single-Phase Rogowski Coil with 0.333 Vac Integrator by Magnelab

Description

The Magnelab RCT-2400 series of single-phase flexible RopeCT^® current sensor kits measure AC current up to 5,000 Amps with a 0.333 Volt AC output

• The RCT-2400 Series integrator (signal conditioner) converts the RopeCT^® (Rogowski Coil) input voltage to 0.333 volt AC output
• The integrator requires a DC power supply which operates from 12 to 30V AC or DC (not included)
• The RCT-2400 flexible Rogowski coil is 24" long
• The flexible Rogowski coils open at the connector junction and may be installed on a bus bar or existing cable in a matter of seconds
• Features
  • Inputs from 250 to 5,000 Amps
  • Output 0.333 V (333 mVac) at rated current
  • Linearity Accuracy ±1%
  • Accuracy from 100 Amps to maximum Amps
  • Phase angle < 0.5 degrees
  • 8 ft. twisted pair leads
  • Maximum Voltage: 600 V (on bare conductor)