MCT-0024-250 250A Input 4~20 mA Output AC Current Transducer by Magnelab

Description

The MCT-0024-250 Split Core Current Transformer has a 4-20 mA DC output with a 24 mm opening

• The MCT-0024-250 measures 250 Amp AC current
• This 4-20 mA Output CT is powered from the 4-20 mA DC loop circuit
• In most cases a loop voltage of 20 VDC is sufficient to power the device
• However, if you are using a shunt in the current loop to generate a detectable voltage (e.g. 250 Ohm), you must take the voltage drop across the shunt into account
• Of course you may also provide additional voltage to the 4-20 mA DC loop if necessary
• The MCT-0024-250 is ± 2% accurate at full scale
• Ripple within 2% of output voltage
• It has a response time of 100 ms
• 4-20 mA CTs are popular because they differentiate a fault condition from zero detection
• With the MCT-0024-250, when there is no current on the primary, the measuring device will still see a 4 mA signal
• Similarly, at the rated current, the measuring device will see 20 mA
• However, when the loop circuit is broken for any reason, as you’d expect, the measuring device will see 0 mA, and the unit detects an error condition
• Because of this special ability to detect error conditions, 4-20 mA Output CTs are often used in control applications (you wouldn’t want to something to be controlled erroneously if the circuit was broken!)
• The MCT-0024-250 can be easily used in retrofitting applications because the split core current transformer opens and closes easily

Cross References:
Veris
H721LC
H721HC
Red Lion
CTL0052S
CTL0502S
CTR05000
CTL2002S